A few Shop prices on popular items
Here at Rodeheaver's we offer just about any product for your high performance application, we can almost always meet or beat others prices, call us today for more info... We also offer many different services which will be priced below, please keep in mind that these prices may change slightly for different applications and for severe or custom cases..
Shop Labor rate, $50/hour
Dyno rates are located on our "dyno" page!
Dyno rates are located on our "dyno" page!
Supercharger installs, $750 (with intercooler)/$550 (no boost cooler)
Gear swap, 250$ labor for drum brake rears,
275$ labor for disc brake rears,
FMS gears 200$+ - 20$(depending on ratio)
Richmond or Motive gears please call.
Speedo correction, usually $50 but some vehicles may differ.
Long tube header install 96-2010, $325+ headers (done in one day or less, hang out with us and watch while we do it!!)
Mid pipe and cat back install, $60 each if you buy it from us!!!
Pa state inspections, 25$ (pass or fail)
Clutch install 87-95 250$, 96-09 350$, with long tubes 450$
Custom Tuning $150/hour, Carb/EFI, If we are tuning your efi car you must have software or purchase it from us. For carbed cars we have a very big selection of jets, air bleeds, power valves, spark plugs, msd springs/bushings, on stock for tuning and purchase.
Gear swap, 250$ labor for drum brake rears,
275$ labor for disc brake rears,
FMS gears 200$+ - 20$(depending on ratio)
Richmond or Motive gears please call.
Speedo correction, usually $50 but some vehicles may differ.
Long tube header install 96-2010, $325+ headers (done in one day or less, hang out with us and watch while we do it!!)
Mid pipe and cat back install, $60 each if you buy it from us!!!
Pa state inspections, 25$ (pass or fail)
Clutch install 87-95 250$, 96-09 350$, with long tubes 450$
Custom Tuning $150/hour, Carb/EFI, If we are tuning your efi car you must have software or purchase it from us. For carbed cars we have a very big selection of jets, air bleeds, power valves, spark plugs, msd springs/bushings, on stock for tuning and purchase.
Exhaust, mufflers, Tips
-Dual exhaust for 1996+ 2wd/4wd trucks with Flowmaster/magnaflow $450
-All tips are stainless steel and you can choose the size!!
-Dual exhaust for 1996+ 2wd/4wd trucks with Flowmaster/magnaflow $450
-All tips are stainless steel and you can choose the size!!
Rollbar & Roll cages Labor Parts
6 POINT ROLL BAR $440.00 $180.00
8 POINT ROLL BAR $630.00 $220.00
10 POINT ROLL CAGE $870.00 $270.00
12 POINT ROLL CAGE $1140.00 $300.00
WINDOW NET MOUNT $75.00 $87.95
NOTE:ABOVE PRICES ARE FOR CARS WITHOUT INTERIORS, $50.00 PER HOUR TO REMOVE AND RE-INSTALL INTERIOR. MUST HAVE DRIVERS SEAT WITH CAR.
6 POINT ROLL BAR $440.00 $180.00
8 POINT ROLL BAR $630.00 $220.00
10 POINT ROLL CAGE $870.00 $270.00
12 POINT ROLL CAGE $1140.00 $300.00
WINDOW NET MOUNT $75.00 $87.95
NOTE:ABOVE PRICES ARE FOR CARS WITHOUT INTERIORS, $50.00 PER HOUR TO REMOVE AND RE-INSTALL INTERIOR. MUST HAVE DRIVERS SEAT WITH CAR.
Suspension & frame Labor Parts
SUBFRAME CONNECTORS $180.00 $89.95 +($60.00 TORQUE BOX REINFORCEMENT)
LADDER BARS SUSPENSION $1,200.00 $799.50
LADDER BAR SUB FRAME $2,000.00 $1,079.00
FUEL CELL AND MOUNT $150.00 PLUS PARTS
BATTERY MOUNTS, EACH $50.00 $28.35
ON/OFF SWITCH MOUNT (standard mount) $50.00 $67.00
GENERAL SHOP RATE $50.00 PER HOUR
Keep in mind, every application is different. Please call for more info, as these are general prices for "bare bones" installs... And each ladder bar / 4-link kit contains chrome moly rod ends, your choice of panhard, wishbone, or diagonal link bars. All ladder bars are double adjustable and either kit includes 3 way adjustable coil overs.
